Get in touch
Search AIC Group
|
Search AIC Group

Ceramic Pollution Control System

This Ceramic Pollution Control System available for purchase, only 180 hours of use.

£35,000

Make an enquiry

Product features include:

  • 440 ceramic elements (each)
  • Excelent Condition
  • Only 180 Hours of use
  • Analogue Control Panel
  • Fly ash control
  • Acid gas control

Delivery, installation and bespoke system integration available at an additional cost.

Contact us today on +0044 (0) 28 3752 6157 for further details.

  • How it works:
    • The Element (1) hangs vertically from header plate (2) within the filter vessel.  The header plate separates the filter’s clean and dirty compartments.
    • Hot Gas is drawn through the filter medium (3) from outside to inside.
    • Particulates and dry scrubbing sorbents are collected on the outer surface (4) of each filter element. These consist of the PM10, PM 2.5 size ranges; these agglomerate.
    • The particles are removed from the element by reverse jet cleaning (5). This reversal causes the accumulated solids to be detached from the outer surface of the ceramic filter elements.
    • The particulates and spent dry-scrubbing sorbents are discharged through the hopper outlet (6) for collection and disposal.
    • The filter body can be protected with insulation (7) and trace heated (8) to prevent the formation of the condensation when the equipment is not in use.
    • Incoming gas stream (9) and sorbent (if required).
    • Outgoing cleansed gas stream (10)
    • Injection point for activated carbon and/or sodium bicarbonate (11)
  • Suitable for:
    • Biomass Boilers
    • Incineration Systems
    • Waste To Energy Systems

Make an Enquiry

For more information about our simply fill out the short form below.

Contact Form
Validation